Plastic Injection Molding Process

Quoting

Once a 3D CAD model is uploaded to ProtoQuote, you can specify material, quantity, finish, overall expectation of the part in a notes section, and essentially, communicate as much information about that part as possible at the time of upload. The part will be analyzed based on Proto Lab’s quick-turn manufacturing process to generate an automated quote; the quote you receive is your initial engagement with Protomold. From there, you can call a Customer Service Engineer with questions about our process and how it relates to your part geometry and make any modifications that are needed.

When you’re satisfied with your design and decide to order your part, it moves to the mold designers at Proto Labs, where they develop your 3D CAD in its negative image to digitally design two halves of the mold, or the A-Side and B-Side. The mold designers create the shutoffs and the parting line — which are custom to your geometry — as well as layout of the gate(s) and ejector pins. The mold design is sent back to you for final approval, and when ready, the necessary toolpathing begins to mill your mold.

Mold production

Protomold designers toolpath the digital mold design to our CNC machines instructing the end mills where to travel on the X, Y and Z planes, so the machine can rapidly mill both sides of the mold out of an aluminum block. Any pickouts, cams or additional mold features that need to be fitted are also created at this time. Your mold is now in a Protomold surface finish stage of F0, or as-milled. The mold moves into our build department where a mold operator is assigned to polish your mold at your desired level of finish. Mold polishing is one of the most detailed and manually intensive processes within Protomold — one that is almost artistic in nature. All of the ejector pins are cut to length, the A-Side and B-Side are assembled to the press and final fittings are done to ensure the mold will seal properly once resin is injected.

Mold production

Part production

Resin pellets — from either Protomold’s stocked supply, which may also include a 3-percent salt-and-pepper mix of colorant, or supplied by a customer — are loaded into a barrel where they will eventually be melted, compressed and injected into the mold’s runner system. Hot resin is shot into the mold cavity through the gates, the part is molded, and ejector pins facilitate removal of the part from the mold and into a loading bin. The thermoplastic injection molding china processes is a standard process involving an aluminum mold with no heating or cooling lines running through it, which means cycle times are a bit longer. It allows our molders to monitor fill pressure, cosmetic concerns and the basic quality of the parts, so they are ready to ship upon finishing. When the run is complete, parts (or the initial sample run) are boxed and shipped shortly thereafter.

Source:-

What Is China Forge

At the moment, about 450 forging operations can be considered as key forging producers, which account for around 90% of total forging production in China. Over 35 joint ventures and foreign proprietary corporations were founded in China. Total of forging production is about 5.43 Million Ton (in 2008); in which there is 3.48 Million Ton closed-die forging including 3.12 Million Ton automotive forgings. 

The energy saving is very important for forging industry. Chinese forging industry should keep investing on energy saving project. In order to meet the Chinese economy developing requirement, the forging industry should strength the cooperation with the related research institute and university, and takes mort technology exchange and product developing to improve the forging quality and produce the valuable forgings.

source:-